How to make good quality plastic broom brush wire

Broom Brush is an indispensable cleaning tool in our life. It is often used for cleaning, descaling, dust removal and etc. The plastic wire/bristle/filament/fiber used for brooms is particular about softness and resilience. Ordinary broom plastic wires Generally, it is made of PP or PET, and the price is cheap, but the plastic broom wire produced by many manufacturers does not have very good resilience. How can we achieve the best effect? The PET/PP plastic broom wire extrusion production line  produced by our company, comprehensively considering the characteristics of raw materials, research and development design, can produce broom wire with good hardness, good resilience, bright color and low production cost.

The plastic wire materials for brushes mainly include: nylon wire, PBT wire, PP wire and PET wire. Nylon wire is undoubtedly one of the materials with the best comprehensive performance, wear-resistant, heat-resistant, good resilience, and strong toughness. However, the cost is relatively high, and the unit price reaches tens to hundreds of yuan/kg. The performance of PBT yarn is similar to that of nylon yarn, with relatively low water absorption, good acid and alkali resistance, and good resilience. The cost is lower than that of nylon yarn, and the unit price is also lower. It costs 20-30 yuan/kg. PP wire and PET have relatively high hardness, good cleaning power, quick rebound after bending, acid and alkali corrosion resistance, and relatively low cost. Generally, it only costs more than ten yuan per kilogram.

For brush wire, broom wire can be seen everywhere in life, but what kind of equipment is used to produce this kind of wire, and many people may not know how to produce it. Today I will introduce to you that this kind of broom wire and brush wire can be seen everywhere in life. How to produce it step by step.

PET broom wire filament can be made from recycled PET bottle flakes. Firstly, the PET bottle flakes or PET granules are dried and crystallized, sent to the extruder to be melted at high temperature, and the prototype is produced through the spinning die, cooled in the cooling water tank, and then sent to the hot water tank by the five-roller or seven-roller tractor. The initial stretching is carried out, and then it is drawn by a five-roll or seven-roll traction machine, dip-coated with a prepared broom silk oil agent, and finally taken up by a two-station winder, and the off-line setting oven is shaped, and then the waste Cutting at the edge, and trimming the packaged finished product.Thus the plastic wire broom wire has finished its production process like this.